Philodendron Davidsonii x Lacerum – A Great Guide

Philodendron davidsonii x lacerum is a rare Philodendron hybrid that is starting to gain popularity among plant enthusiasts. This unique Philodendron was created by crossing Philodendron davidsonii with Philodendron lacerum, and the end result is a stunning plant that has both broad leaves and long, lacy leaflets. If you’re looking for an eye-catching addition to your garden, then be sure to add Philodendron davidsonii x lacerum to your list!

Philodendron Davidsonii x Lacerum Appearance

Philodendron davidsonii x lacerum is a hybrid plant that is characterized by its glossy green leaves and creeping habit. The leaves of this plant are large and oval-shaped, with serrated edges. The stems are long and slender, and they tend to twine around other plants or objects.

It is a fast-growing plant, and it can reach up to 10 feet in length. This plant is native to the tropical regions of Brazil, and it prefers warm, humid conditions. It is a popular houseplant, and it is often grown in hanging baskets or as a groundcover.


Drought Tolerance

It is a drought-tolerant plant. So, it does not require frequent watering.

Air Purification

It can help to purify the air in your home. Its large leaves can filter out harmful toxins from the air.


It is a pet-friendly plant. So, you don’t have to worry about your pets nibbling on its leaves.


It is a low-maintenance plant. So, it is easy to care for. Beginners can also grow it with ease.


It is a toxic plant. So, keep it away from children and pets. Its leaves contain harmful toxins that can cause skin irritation.


It goes into dormancy during the winter months. So, don’t be alarmed if its leaves start to turn brown and fall off.

Philodendron Davidsonii x Lacerum Care

Philodendron davidsonii x lacerum care includes giving the plant bright, indirect light and well-draining soil. This plant prefers warm temperatures, so it is best to keep it indoors in a heated room. During the winter months, the plant will go into dormancy. So, you can reduce watering during this time.

Quick Guide

SoilWell-draining aroid mix.
LightBright, indirect sunlight.
Water Once every week.
FertilizerTwo times a month.
PruningDuring spring.
HumidityMore than 60%.
Temperature55°- 80°F.
RepottingAfter 1-2 years.


The soil should be well-draining and rich in organic matter. You can use a store-bought aroid mix or make your own. To make your own, mix together equal parts peat moss, perlite, and bark chips.


Philodendron Davidsonii x Lacerum prefers bright, indirect sunlight. So, place it near a window where it can get plenty of light. However, avoid placing it in direct sunlight, as this can scorch its leaves.


Water once every week to keep the soil moist but not soggy. During the winter months, you can reduce watering to once every two weeks. The plant will go into dormancy during this time, so it will need less water.


This plant prefers high humidity. So, mist its leaves regularly or place it on a pebble tray. You can also use a humidifier to increase the humidity around the plant.


Philodendron Davidsonii x Lacerum prefers warm temperatures. So, keep it in a heated room during the winter months. The ideal temperature range is 55°- 80°F.


Fertilize Philodendron Davidsonii x Lacerum two times a month with a half-strength fertilizer solution. Be sure to use a fertilizer that is formulated for houseplants.


Prune the plant in spring to remove any dead or damaged leaves. You can also prune it to control its size and shape.

Repotting Requirements

Repot the plant every one to two years, or when it becomes pot-bound. Use a well-draining potting mix and a pot that has drainage holes.

How to Repot Philodendron Davidsonii x Lacerum

If your plant shows signs of being pot-bound, then it’s time to repot it. Use a well-draining potting mix and a pot that has drainage holes. Be sure to water the plant thoroughly before repotting it.

  1. Choose a well-draining potting mix and a pot that has drainage holes.
  2. Water the plant thoroughly before repotting it.
  3. Carefully remove the plant from its pot.
  4. Place the plant in the new pot and fill in with a potting mix.
  5. Water the plant well and place it in a warm, bright location.

When to Repot Philodendron Davidsonii x Lacerum

The best time to repot Philodendron davidsonii x lacerum is in spring. This will give the plant a chance to establish itself in its new pot before the growing season begins.

Philodendron Davidsonii Vs. Lacerum Propagation

If you have a Philodendron davidsonii x lacerum plant, then you can propagate it by division. This is best done in spring or summer when the plant is actively growing. To propagate by division, follow these steps:

  1. Carefully remove the plant from its pot.
  2. Use a sharp knife to divide the root ball into two or three sections.
  3. Plant each section in its own pot and water well.

To propagate this plant via stem cuttings, follow these steps:

  1. Cut a stem that is about six inches long and has at least two leaves.
  2. Remove the bottom leaves and dip the cut end in a rooting hormone.
  3. Plant the cutting in a well-draining potting mix and water thoroughly.
  4. Place the pot in a warm, bright location and keep the soil moist.

Symptoms of Overwatering or Underwatering 

If you think you are either overwatering or underwatering your plant, then look for these signs:


  • Wilting and yellow leaves.
  • The stems are soft and mushy.
  • The roots are rotting.


  • The leaves are drying out and turning brown.
  • The stems are shriveled and dry.

If you see any of these symptoms, then adjust your watering schedule accordingly. 

Common Problems and Their Solutions

One of the most common problems with this Philodendron hybrid is root rot. This can be caused by overwatering or planting in a pot that doesn’t have drainage holes. If you think your plant has root rot, then remove it from its pot and check the roots. If they are mushy or black, then they are probably rotting. 

To save your plant, cut away the affected roots and repot in a well-draining potting mix. Be sure to water it carefully and only when the soil is dry to the touch. 

If you see brown spots on the leaves, then this is another common problem with this plant. This can be caused by too much direct sunlight or by a lack of humidity. If you think your plant is getting too much sun, then move it to a shadier location. If it’s not getting enough humidity, then try misting the leaves or placing the pot on a tray of pebbles and water. 


This plant is relatively resistant to pests and diseases, but mealybugs can be a problem. Mealybugs are small, white insects that suck the sap out of plants. They can cause the leaves to turn yellow and eventually drop off. 

To get rid of mealybugs, you can use an insecticidal soap or neem oil. Be sure to follow the instructions on the label. 

You can also prevent mealybugs by keeping your plant healthy and stress-free. This will make it less attractive to pests. 


This plant is relatively resistant to diseases, but it can be affected by a few. These include:

  • Fungal diseases like powdery mildew and leaf spot.
  • Bacterial diseases like bacterial blight and soft rot.

To prevent these diseases, be sure to water your plant carefully and only when the soil is dry to the touch. Avoid getting water on the leaves, and don’t overcrowd your plants. 

If you see any signs of disease, then isolate the affected plant and treat it with a fungicide or bactericide. Be sure to follow the instructions on the label. 

Philodendron Davidsonii x Lacerum Indoor Care

Here are some tips to help you care for this plant indoors:

  • Place the plant in bright, indirect light. 
  • Water when the top inch of soil is dry. 
  • Fertilize bimonthly during the growing season. 
  • Humidity is important, so mist the leaves regularly or place the pot on a tray of pebbles and water. 
  • Pruning is not necessary, but you can trim away any yellow or brown leaves. 

Philodendron Davidsonii Vs. Lacerum FAQs

Is Philodendron davidsonii x lacerum poisonous?

Yes, it is a poisonous plant. All parts of the plant are toxic, and even touching it can cause skin irritation. Symptoms of poisoning include nausea, vomiting, diarrhea, and abdominal pain. In severe cases, seizures and respiratory failure may occur. There is no antidote for Philodendron davidsonii x lacerum poisoning, so if you think someone has been poisoned by this plant, seek medical help immediately.

Can this plant tolerate low humidity?

This plant is quite drought tolerant and can survive in low humidity conditions. However, it will look better and flower more prolifically if given proper humidity levels.

How often should I repot Philodendron Davidsonii x Lacerum?

The frequency with which you should repot this plant depends on the size of the pot and the rate of growth of the plant. If the pot is too small and the plant is growing rapidly, then you should repot it into a larger pot every year or two. If the pot is large enough and the plant is growing slowly, then you may be able to wait three or four years before repotting.


This hybrid of Philodendron davidsonii and Philodendron Lacerum is a beautiful and unique plant that makes a great addition to any indoor plant collection. It is easy to care for and can tolerate a wide range of growing conditions. We highly recommend this plant to anyone looking for something a little different. Thanks for reading!

Leave a Comment